MRPPad v 3.23.50

Details

Published: 17 July 2020

What's New?

BOOTBENCH program for reading all EDC17/MED17 BOSCH control units without having to open them, with the simple addition of 2 more wires, with connection on bench!

• License PROGRAMMER** + CHARACTERISTIC DATA and SPECIAL FUNCTIONS (all brands except the VAG group) ==> Price 1500€ ,
• License CHARACTERISTIC DATA + IMMO DATA VAG group (Audi-Seat-Skoda-Volkswagen) ==> Price 500€.

• Read/Write EEPROM with automatic checksum recalculation ,
• FLASH read/write with automatic checksum recalculation . (In version 3.22, it's available only Flash reading, writing and checksum recalculation will be released later and will be included in the license already purchased)

• EDC17C84 - Caratheristics data, VIN change,

• MED17.1 - Caratheristics data.

• EDC17C11 - Caratheristics data, VIN change.

• EDC17C49 - Caratheristics data.

• EDC17C42 - Caratheristics data, VIN change.

• BMSX8 - Caratheristics data.

• EDC17CV56 - Caratheristics data.

Dear customer, due to an error of the PCB supplier of Edc17Prog, 2 resistors have been mounted which compromise the functioning of the interface for the BootBench program.
It is therefore necessary to open the interface and remove 2 resistors. It is possible to find a detailed guide of the operations to be carried out by clicking on the following link

MRPPad v 3.22.49

Details

Published: 13 July 2020

What's New?

BOOTBENCH program for reading all EDC17/MED17 BOSCH control units without having to open them, with the simple addition of 2 more wires, with connection on bench!

• License PROGRAMMER** + CHARACTERISTIC DATA and SPECIAL FUNCTIONS (all brands except the VAG group) ==> Price 1500€ ,
• License CHARACTERISTIC DATA + IMMO DATA VAG group (Audi-Seat-Skoda-Volkswagen) ==> Price 500€.

• Read/Write EEPROM with automatic checksum recalculation ,
• FLASH read/write with automatic checksum recalculation . (In version 3.23, it's available only Flash reading, writing and checksum recalculation will be released later and will be included in the license already purchased)

• EDC17C18 - Caratheristics Data, CARPASS display, VIN change,
• EDC17C19 - Caratheristics Data, CARPASS display, VIN change,
• EDC17C59 - Caratheristics Data, CARPASS display, VIN change,
• EDC17C42 - Caratheristics Data , VIN change.
• EDC17C18/EDC17C19/EDC17C59 - POSSIBILITY TO ADAPT A CONTROL UNIT used starting from the file of the BCU mounted on the control unit! The supported BCUs are as follows:
• OPEL/GM BOSCH BCM 70F3469/70F3385 with memory 24C16,
• OPEL/GM BOSCH BCM 70F3558 with memory 24C32,
• OPEL/GM CONTINENTAL BCM 70F3469 with memory 25160/95160,
• OPEL/GM CONTINENTAL BCM 70F3558 with memory 25320/95320.

• EDC17C74 - Caratheristics Data.

• EDC17C70 - Caratheristics Data, VIN change.

• EDC17C42 - Caratheristics Data, VIN change.

Dear customer, due to an error of the PCB supplier of Edc17Prog, 2 resistors have been mounted which compromise the functioning of the interface for the BootBench program.
It is therefore necessary to open the interface and remove 2 resistors. It is possible to find a detailed guide of the operations to be carried out by clicking on the following link

MRPPad v 3.21.46

Details

Published: 23 June 2020

What's New?

BOOTBENCH program for reading all EDC17/MED17 BOSCH control units without having to open them, with the simple addition of 2 more wires, with connection on bench!

• License PROGRAMMER* + CHARACTERISTIC DATA and SPECIAL FUNCTIONS (all brands except the VAG group) ==> Price 1500€ ,
• License CHARACTERISTIC DATA + IMMO DATA VAG group (Audi-Seat-Skoda-Volkswagen) ==> Price 500€.

• Read/Write EEPROM with automatic checksum recalculation ,
• FLASH read/write with automatic checksum recalculation . (In version 3.21, it's available only Flash reading, writing and checksum recalculation will be released later and will be included in the license already purchased)

• EDC17C49 - Caratheristics Data - IMMO PARAMETERS (Electronic Code + vergin ECU),
• EDC17C69 - Caratheristics Data - IMMO PARAMETERS (Electronic Code + vergin ECU),
• ME17.3.0 - Caratheristics Data - IMMO PARAMETERS (Electronic Code + vergin ECU),
• MED17.3.1 CAN - Caratheristics Data - IMMO PARAMETERS (Electronic Code + vergin ECU),
• MED17.3.1 K-LINE - Caratheristics Data - IMMO PARAMETERS (Electronic Code + vergin ECU).

• EDC17C46 - Caratheristics Data - IMMO PARAMETERS (Vin, Component Security Bytes, Mac, Login + reuse of already coded egine ecus),
• EDC17C64 - Caratheristics Data - IMMO PARAMETERS (Vin, Component Security Bytes, Mac, Login + reuse of already coded egine ecus),
• EDC17CP04 - Caratheristics Data - IMMO PARAMETERS (Vin, Component Security Bytes, Mac, Login + reuse of already coded egine ecus),
• EDC17CP14 - Caratheristics Data - IMMO PARAMETERS (Vin, Component Security Bytes, Mac, Login + reuse of already coded egine ecus),
• EDC17CP20 - Caratheristics Data - IMMO PARAMETERS (Vin, Component Security Bytes, Mac, Login + reuse of already coded egine ecus),
• EDC17CP44 - Caratheristics Data - IMMO PARAMETERS (Vin, Component Security Bytes, Mac, Login + reuse of already coded egine ecus),
• EDC17U01 - Caratheristics Data - IMMO PARAMETERS (Vin, Component Security Bytes, Mac, Login + reuse of already coded egine ecus),
• EDC17U05 - Caratheristics Data - IMMO PARAMETERS (Vin, Component Security Bytes, Mac, Login + reuse of already coded egine ecus),
• MED17.5.20 - Caratheristics Data - IMMO PARAMETERS (Vin, Component Security Bytes, Mac, Login + reuse of already coded egine ecus),
• MED17.5.21 - Caratheristics Data,
• MED17.5.5 - Caratheristics Data - IMMO PARAMETERS (Vin, Component Security Bytes, Mac, Login + reuse of already coded egine ecus),

Dear customer, due to an error of the PCB supplier of Edc17Prog, 2 resistors have been mounted which compromise the functioning of the interface for the BootBench program.
It is therefore necessary to open the interface and remove 2 resistors. It is possible to find a detailed guide of the operations to be carried out by clicking on the following link

MAGNETI MARELLI v.23 database released

Details

Published: 06 June 2020

MAGNETI MARELLI v.23 database released with 581 different control unit models! Contact us to update!

COVID 19

Details

Published: 08 April 2020

Dear customers,

until Friday 20 March 2020 we continued our work, also with reduced workers, in our Bergamo office. Since several days we had no longer the opportunity to send and receive parcels, because almost all couriers have suspended collection and delivery throughout the province of Bergamo.

Bergamo, the most affected Italian province, currently has 5819 cases and more than 500 deaths; Healthcare is collapsing and it is not possible to even honor the memory of the dead with a worthy burial and a funeral. The coffins have been brought several times by the army out of the province and region, because the funeral agencies are unable to cope with such a strong increase in deaths.

From today, Sunday 22 March 2020 and, until otherwise ordered 15 April 2020, the Lombardy region has effectively prohibited any work outside of those related to the emergency. We, diligently, and for the protection of the whole population, temporarily close our Bergamo office.

But we continue to put all of ourselves, our commitment and our dedication in the work we believe in, to be able to raise our heads together, to honor the sacrifice of many of our fellow citizens, many Italians and many citizens of the world.

We have reorganized our homes for everything we need to be able to work from home, we have asked our families to be patient, our children to understand that in this situation this too is a way for us to demonstrate our sense of duty and our dedication.

Now let's pray for those who are no longer there and for those who suffer, let's work hard and we will find ourselves stronger and with many new features, as soon as we pass this terrible test.

We leave you, in the hope of being able to see you as soon as possible with a thought, which represents for us the starting point in our daily commitment, today more than ever.

A virtual hug and a thought towards each of you ...

Automotive ART SRL

RESILIENCE

"It is the ability to cope with traumatic events in a positive way, to positively reorganize life in the face of difficulties.
It is the ability to rebuild while remaining sensitive to the positive opportunities that life offers, without losing one's humanity.
I start from here."

EDC17 BootBench Program

Details

Published: 29 March 2020

Here are the advantages of EDC17 programming in BOOTBENCH Mode!

TIME SAVING!

It is no longer necessary to remove the lower cover of the control unit to weld one or more BOOT wires.

This means faster repair time of the control unit and NO BREAKING RISK!

It is sufficient to connect 2 more wires to the comb of the control unit in addition to the power supplies and the 2 CAN lines. So in total 6 wires!

ALL MEMORY ACCESS!

The program allows read and write access to the eeprom and flash of the following tricore microcontrollers:

• SAKTC1724,
• SAKTC1728,
• SAKTC1762,
• SAKTC1766,
• SAKTC1767,
• SAKTC1782,
• SAKTC1784,
• SAKTC1792,
• SAKTC1796,
• SAKTC1797,
• SAKTC1791,
• SAKTC1793.

The automatic checksum recalculation for the eeprom memory is also guaranteed. The flash checksum recalculation will be added shortly.

ADDITIONAL FUNCTIONS!

In addition to the odometer adjust functions already supported with the classic boot connection, we have added some VERY USEFUL SPECIAL functions!

• Display of the ELECTRONIC CODE (FCA Group + IVECO) directly from the engine control unit,
• Revergination of all EDC17 (FCA Group),
• Read / Write Code (Sync Ecu) PSA Group,
• Immo OFF PSA Group,
• Revergination EDC17 Ford ECUs,
• Revergination EDC17 Hyundai, Kia,
• Revergination of EDC17 Renault control units,
• Immo data, CARPASS reading, OPEL ECU re-adjusting,
• ISN reading EDC17 BMW control units.

• FIAT 500L
• FIAT 500X
• FIAT FREEMONT
• FIAT DUCATO
• ALFA ROMEO STELVIO
• ALFA ROMEO GIULIA

Some supported models:

EDC17 Ecus Alfa Romeo - Fiat - Lancia - Iveco

MED17.3.1

• Read/Write VIN (if available),
• Read Electronic Code (needed to program a new key),
• Read/Write odometer,
• VIRGIN ECU

MED17.3.0

• Read/Write VIN (if available),
• Read Electronic Code (needed to program a new key),
• Read/Write odometer,
• VIRGIN ECU

EDC17C49

• Read/Write VIN (if available),
• Read Electronic Code (needed to program a new key),
• Read/Write odometer,
• VIRGIN ECU

EDC17C69

• Read/Write VIN (if available),
• Read Electronic Code (needed to program a new key),
• Read/Write odometer,
• VIRGIN ECU

EDC17CP52

• Read/Write VIN (if available),
• Read Electronic Code (needed to program a new key),
• Read/Write odometer,
• VIRGIN ECU

Some supported models:

EDC17 Ecus Citroen - Peugeot

EDC17C10

• Read/Write VIN (if available),
• Read/Write Code (Sync Ecu),
• Read/Write odometer,
• IMMO OFF

EDC17C60

• Read/Write VIN (if available),
• Read/Write Code (Sync Ecu),
• Read/Write odometer,
• IMMO OFF

MEV17.X

• Read/Write VIN (if available),
• Read/Write Code (Sync Ecu),
• Read/Write odometer,
• IMMO OFF

Some supported models:

EDC17 Ecus Ford

EDC17C10

• Read/Write VIN (if available),
• Read/Write odometer,
  
• VIRGIN ECU

EDC17C70

• Read/Write VIN (if available),
• Read/Write odometer,
  
• VIRGIN ECU

• (copy)

Some supported models:

EDC17 Ecus Hyundai - Kia

EDC17C08

• Read/Write VIN (if available),
• Read/Write odometer,
  
• VIRGIN ECU

EDC17C57

• Read/Write VIN (if available),
• Read/Write odometer,
  
• VIRGIN ECU

Some supported models:

EDC17 Ecus Dacia - Renault

EDC17C11

• Read/Write VIN (if available),
• Read/Write odometer,
  
• VIRGIN ECU

EDC17C42

• Read/Write VIN (if available),
• Read/Write odometer,
  
• VIRGIN ECU

EDC17C84

• Read/Write VIN (if available),
• Read/Write odometer,
  
• VIRGIN ECU

• FIAT 500L
• FIAT 500X
• FIAT FREEMONT
• FIAT DUCATO
• ALFA ROMEO STELVIO
• ALFA ROMEO GIULIA

Some supported models:

EDC17 Ecus Opel

EDC17C11

• Read/Write VIN (if available),
• Read/Write odometer,
  
• VIRGIN ECU

EDC17C42

• Read/Write VIN (if available),
• Read/Write odometer,
  
• VIRGIN ECU

EDC17C18

• Read/Write VIN (if available),
• Read/Write CARPASS (needed to program new key),
• Read/Write odometer,
• VIRGIN ECU

EDC17C19

• Read/Write VIN (if available),
• Read/Write CARPASS (needed to program new key),
• Read/Write odometer,
• VIRGIN ECU

EDC17C59

• Read/Write VIN (if available),
• Read/Write CARPASS (needed to program new key),
• Read/Write odometer,
• VIRGIN ECU

• FIAT 500L
• FIAT 500X
• FIAT FREEMONT
• FIAT DUCATO
• ALFA ROMEO STELVIO
• ALFA ROMEO GIULIA

Some supported models:

EDC17 Ecus Bmw - Mini

EDC17C50

• Read/Write VIN (if available),
• Read/Write odometer,
• Read ISN code

MEV17.x

• Read/Write VIN (if available),
• Read/Write odometer,
• Read ISN code.

MRPPad v 3.20 Immo Data Read Body NEC +95160/95320 Fiat/Iveco OBDII

Details

Published: 19 February 2020

In the "Multifunctional Ecu" module:

Body Marelli NEC+95160 e NEC+95320

Added the function:

1. Immobilizer data.

The function allow immo data reading with direct connection to the vehicle. The output file is not eeprom file. The output file has only immo data and has eeprom dimension to be compatible with software for key precoding.

It is necessary to update OBD interface to 2.29 version.

MAGNETI MARELLI v.22 database released

Details

Published: 06 February 2020

MAGNETI MARELLI v.22 database released with 569 different control unit models! Contact us to update!

MAGNETI MARELLI v.21 database released

Details

Published: 06 February 2020

MAGNETI MARELLI v.21 database released with 546 different control unit models! Contact us to update!

MRPPad v 3.19 Cas4 Modules Enhanced Version

Details

Published: 30 January 2020

Improved version of the software for CAS4 control units with microcontrollers:

• MC9S12XEP100 (5M48H),
• MC9S12XEP100 (1N35H).

Detailed explanation of the BDM (Background Debug Module) and automatic or manual possibility of locking/unlocking.

WARNING: It is necessary to read the Data Flash and Program Flash, before carrying out any writing operation.

If the microcontroller is written, an automatic BDM block removal procedure will start which will leave the microcontroller OPEN for a safe writing of the Data Flash and/or Program Flash.

At the end of the writing operations it is necessary to reset the BDM block by pressing the "ENABLE MICRO PROTECTION" button.

New AUTOMATIC PROGRAM FLASH RESTORE function in case of errors. The correct Program Flash file for the vehicle is automatically downloaded from the MRPPAD server and written to the control unit to restore its operation.

MRPPad v 3.19 Body Computer Delphi OPEL CORSA D / MERIVA B

Details

Published: 03 December 2019

Body Delphi NEC D70F3238 and NEC D70F3379 (Opel Corsa D)

Main Functions:

1. Show carpass,
2. Read/Write Vin,

Read/Write body computer memories and cloning:

• Read/write eeprom, read/write flash, complete cloning and restore.

Body Delphi NEC D70F633 (Opel Meriva B)

Main Functions:

1. Show carpass,
2. Read Vin,

Read/write memories and body computer cloning:

• Read/write data flash, read/write flash, complete cloning and restore.

It is necessary to update OBD interface to 2.25 version

MRPPad v 3.18 BCM Porsche Enhanced Version

Details

Published: 27 November 2019

Improved version of the software for BCM PORSCHE control units with microcontrollers:

• MC9S12XEP100 (5M48H),
• MC9S12XEP100 (1N35H),
• MC9S12XET512 (2M25J-3M25J).

New connection scheme without the need to remove any component from the board

Detailed explanation of the BDM (Background Debug Module) and automatic or manual possibility of locking/unlocking.

WARNING: It is necessary to read the Data Flash and Program Flash, before carrying out any writing operation.

If the microcontroller is written, an automatic BDM block removal procedure will start which will leave the microcontroller OPEN for a safe writing of the Data Flash and/or Program Flash.

At the end of the writing operations it is necessary to reset the BDM block by pressing the "ENABLE MICRO PROTECTION" button.

MRPPad v 3.18 EDC16C3 PSA PinCode - EDC16C34 Ford Eeprom repair - VAG 4MX Immo Data

Details

Published: 07 November 2019

BOSCH EDC16C3 95160

Main Functions:

1. Visualization and modification of the Pincode.

MAGNETI MARELLI 4MX 95080

Main Functions:

1. Show S/N,
2. Show immobilizer,
3. Show SKC,
4. Show Login,
5. Show Telaio,
6. Save immo data,
7. Load immo data,

BOSCH EDC16C34 95160

Main Functions:

1. Repair eeprom file (In presence of "EEPROM FAILURE" diagnostic error, function that allows the immobilizer data to be restored by repairing the eeprom file.

It is necessary to update XEP100 PROG interface to 3.7 version

MRPPad v 3.17 Body Computer IVECO Nec D70F3633 (95320 memory) + MB91465P OBDII

Details

Published: 25 October 2019

Body Iveco MARELLI
FUJITSU MB91465P + memoria 95640,
NEC D70F3633 + memoria 95320

Main Functions:

1. Read/Write eeprom/data Flash,
2. Read Program Flash (only NEC D70F3633),
3. Read electronic code,
4. Read active keys IDs with the possibility to disable,
5. Read erased keys IDs with the possibility to enable.
6. Display and modification (with checksum recalculation) of vehicle VIN,
7. Display and adapt of odometer value stored in body computer (only MB91465P).

It is necessary to update OBD interface to 2.23 version

MRPPad v 3.16 Body Computer FCA Delphi Nec 70F3633 MOPAR OBDII

Details

Published: 18 October 2019

Body Delphi NEC D70F3633 MOPAR MARKED (Fiat 500 Restyling/Panda Restyling - Lancia Ypsilon) 2017 models till now

Main Functions:

1. Read/Write Data Flash,
2. Read/Write Program Flash,
3. Read electronic code,
4. Read active keys IDs with the possibility to disable,
5. Read erased keys IDs with the possibility to enable.

Read/write memories and body computer cloning:

• Read/write eeprom, read/write flash, complete cloning and restore.

It is necessary to update OBD interface to 2.23 version

MRPPad v 3.15 Nec V850E/ES read/write Code/Data Flash

Details

Published: 15 August 2019

Main Functions:

1. Read/write Data Flash,
2. Read/write Code Flash,
3. Automatic memory size identification Code Flash/Data Flash,
4. Automatic clock frequency identification.

This program allows you to read/program all the microcontrollers in the series:

1. μPD70F32XX (μPD70F3230/31/32/33/34/35/36/37/38/39),
2. μPD70F33XX (μPD70F3333/34/35/36/40/41/42/43/50/51/52/53/44/45/46/47/48/
   54/55/56/57/58/64/65/66/67/68/70a/71/72/73/74/75/76a/
   77a/78/79/80/81/82/83/84/85),
3. μPD70F34XX (μPD70F33416/17/21/22/23/24/25/26a/27/61/64/65/66/69/70/71/72),
4. μPD70F36XX (μPD70F3610/11/12/13/14/15/16/17/18/19/20/21/22/24/28/29/30/
   31/32/33/34/35/36/37/38).

Clicking on the "INFO" icon (top right) is available all the detailed information of the chosen family, as well as the general diagrams, datasheets and pinout specific for each of the microcontrollers

Clicking on the "MANUAL" icon (top right) are available ready diagrams for units that mount this type of microcontroller. For example:

1. Body Computer Fiat (DELPHI, MARELLI),
2. Renault dashboards,
3. Ford dashboards,
4. BCU Opel,
5. BCM2 VAG.

The programming function for NEC microcontrollers is available both in the "PROGRAMMER" function (menu available by selecting any brand, in the menu concealed on the left) , both in the menu specific for each of the supported control units; for example for Fiat Computer Body it's available a new item from menu "NEC DIRECT" with the connection schema and the ECU MEMORIES function which enables reading and writing functions.

ATTENTION: The program does not allow to read the blocked microcontrollers.

It is necessary to update XEP100 PROG interface to 3.6 version

MRPPad v 3.14 Body Computer FCA Delphi Nec 70F3556 OBDII

Details

Published: 15 July 2019

In the "Multifunctional Ecu" module:

Body Delphi NEC D70F3556 (Fiat 500X-Tipo/Jeep Renegade-Compass)

Main Functions:

1. Read/Write Data Flash,
2. Read/Write Program Flash.

It is necessary to update OBD interface to 2.21 version

MRPPad v 3.13 ABS Fiat Tipo/Panda

Details

Published: 17 June 2019

In the "Multifunctional Ecu" module:

ABS Fiat Tipo/Panda

Main Functions:

1. Read/Write Vin,
2. Historical realignment Reset/Warning/Calibrations TPMS (tyre pressure monitor).

MRPPad v 3.12 BMW GS1200 Motorbike - 35160 Dashboard + BMSX8 Ecu (Tricore SAK-TC1797)

Details

Published: 10 June 2019

In the "Dashboard" module, added:

• BMW GS1200 BIKE (Modify Caratheristics data - Read/Write eeprom)

In the "Engine ECUs" module, added:

• BMSX8 Tricore SAK-TC1797 (Caratheristics data, EDC17 online checksum recalculation, read/write eeprom)

It is necessary to update Xep100 Prog interface to 3.5 version

MRPPad v 3.11 35128 Emulators + BMW G-Series dashboards

Details

Published: 04 June 2019

In the "Programmer" module:

NEW 35128 EMULATOR SUPPORT ADDED

In G-Series BMW Dashboards are mounted 35128 memories which are not erasable and has page-id lock to the specific dashboard in which are mounted.
If you need to repair dashboard you cannot erase or substitute original memory with recoved one. The solution is cloning the originale one (both eeprom array and page-id) on our NEW 35128 EMULATOR. In Programmer menu under 35XXX and 35128 EMULATOR, is available a GUIDED PROCEDURE which helps you to clone the original memory to emulator in a very simple way.

Contact Automotive Art for all other informations or for emulator purchase

In the "Dashboard" module, added:

• 7 SERIES G11 35128 (Modify Caratheristics data - Read/Write eeprom)

It is necessary to update OBD interface to 2.19 version
It is necessary to update Xep100 Prog interface to 3.4 version

MAGNETI MARELLI v.20 database released

Details

Published: 05 April 2019

MAGNETI MARELLI v.20 database released with 524 different control unit models! Contact us to update!

MRPPad v 3.09 Suzuki EDC17C49 EN

Details

Published: 21 March 2019

SUZUKI EDC17C49

Suzuki SX4, C-CROSS 1600 JTD MY2013

Supported functions:

• Caratheristics data,
• Read/Write eeprom,
• EDC17 online checksum recalculation.

MRPPad v 3.10 Bmw EDC17C50 EN

Details

Published: 02 April 2019

BMW EDC17C50

   F20/F21 (114d,116d,118d,120d)
 F22/F23/F45/F46 (214d,216d,218d,220d)
 E90/E91/E92/E93/F31/F34 (316d,318d,320d)
 F32/F33/F36 (418d,420d)
 F07/F10/F11 (518d,520d)
 X1 F48 (16d,18d,20d)
 X2 F39 (20d)
 X3 F25 (18d,20d)
 X4 F26 (20d)
 X5 F15 (25d)

 Supported functions:

• Caratheristics data,
• Show/modify VIN and ISN,
• Read/Write eeprom,
• EDC17 online checksum recalculation.

MRPPad v 3.07 PORSCHE SDI9 + CAS1 BMW

Details

Published: 19 December 2018

PORSCHE SDI9

• Caratheristic data modification,
• Automatic checksum recalculation.

BMW CAS1

• CAS1 HC912DG128 (Modify Carateristics data - Read/Write eeprom - Read/Write Flash
• CAS1 HC9S12DG256 (Modify Carateristics data - Read/Write eeprom - Read/Write Flash

MRPPad v 3.08 Kia Hyunday EDC17C08 EDC17C57 EDC17Prog EN

Details

Published: 11 March 2019

HYUNDAI/KIA EDC17C08

All models with 1600/1700/2000/2200 CRDi motor from MY2009 till MY2014.
Supported functions:

• Caratheristics data,
• Read/Write eeprom,
• EDC17 online checksum recalculation.

HYUNDAI/KIA EDC17C57

All models with 1400/1700/2000/2200 CRDi motor from MY2015 till latest.
Supported functions:

• Caratheristics data,
• Read/Write eeprom,
• EDC17 online checksum recalculation.

MRPPad v 3.06 Ford EDC17C70 EDC17Prog

Details

Published: 26 November 2018

MRPPad v 3.06 Ford EDC17C70 EDC17Prog

characteristic datas - read and write

eeprom 1 - read and write

eeprom 2 - read and write

checksum recalculation

V 3.01 FRM3 BMW XEP100Prog

Details

Published: 20 August 2018

---

BMW FRM3 9S12XEQ384 3M25J XEP100PROG

Data flash - read data flash

Program flash - read/write program flash

Eeprom - read/write eeprom

ECU recover * - FRM ECUs (BMW / Mini lights module) often suffer from the eeprom memory encoding loss due to errors in the Eeprom emulation procedure in Flash. These problems cause malfunctions of the unit (eg No ignition or non-switching off of the lights of the vehicle, glass window control breakdowns etc.) This function allows the automatic repair of the Eeprom file in these ECUs with consequent functionalities recover.

* This function can only be performed with an active Internet connection (via WIFI or GPRS / 3 / 4G)

V 3.02 ABS FCA 500X Renegade XEP100Prog

Details

Published: 27 August 2018

ABS FCA 500X RENEGADE XEP100PROG

Eeprom - read and write eeprom 95640

Characteristic datas - read and write characteristic datas

V 3.03 Smart 450-451 SAM OBD

Details

Published: 03 September 2018

SMART 450-451 SAM OBD

Micro 9S12 - read and write eeprom

Micro 9S12 - read and write flash

characteristic datas - read and write

checksum recalculation

MRPPad v 3.04 Suzuki MJD8DS OBD

Details

Published: 16 October 2018

MRPPad v 3.04 Suzuki MJD8DS OBD

characteristic datas - read and write

eeprom - read and write

flash - read and write

checksum recalculation

MRPPad v 3.05 Alfa Romeo EDC17C69 EDC17Prog

Details

Published: 19 October 2018

MRPPad v 3.05 Alfa Romeo EDC17C69 EDC17Prog

characteristic datas - read and write

eeprom 1 - read and write

eeprom 2 - read and write

checksum recalculation

V 3.00 Body Fiat OBD

Details

Published: 31 July 2018

---

Many models - Ranging from Fiat Punto 188 (1999) to Fiat 500X (2018)

• Alfa romeo - 147 - 159 - Brera - Spider - Mito - Giulietta
• Fiat - Punto 188 - Doblo' - Palio - Albea - Stilo - Idea - Croma - Panda - Punto restyling - Panda restyling - Bravo - 500 - 500 restyling - 500L - Grande punto - Grande punto evo - Fiorino - Qubo - Ducato
• Lancia - Thesis - Delta - Ypsilon - Ypsilon (2007-2011) - Ypsilon (2011-)

via OBD - EEPROM and flash via OBD

Code - Code card reading

Immo - Immo datas reading

Checksum - Checksum check and recalculation for all versions

New MRPPad

Details

Published: 16 May 2018

The NEW MRPPad

The new MRPPad is almost here

MRPPad had been renewed and improved: ranging from style, features and support. We've been working to improve our user experience and we worked on some fine tunes to make MRPPad even better.

---

Restyling

Renewed graphic and intuitive menu and navigation - for better user experience

Improvements

Operational procedures improved with guided modes, new technical manuals and step-by-step info

Support

Support even more integrated in MRPPad with Skype direct link and Team Viewer direct link

V 2.24 BSI Examiner OBD

Details

Published: 04 October 2017

Available for module "Multifunctional Ecu", added new group BSI EXAMINER:

• BSI VALEO BSI2004-P0X-00 programming (caratheristics data, complete read/write EEPROM, read/write flash, may be duplicated, code card, history) via OBD-PRO interface
• BSI VALEO BSIEV-X0X-00 programming (caratheristics data, complete read/write EEPROM, read/write flash, may be duplicated, code card, history) via OBD-PRO interface
• BSI VALEO BSI-N0X-00 programming (caratheristics data, complete read/write EEPROM, read/write flash, may be duplicated, code card, history) via OBD-PRO interface
• BSI JOHNSON CONTROL BSI2004-H0X programming (caratheristics data, complete read/write EEPROM, read/write flash, may be duplicated, code card, history) via OBD-PRO interface
• BSI JOHNSON CONTROL BSI04EV-K0X programming (caratheristics data, complete read/write EEPROM, read/write flash, may be duplicated, code card, history) via OBD-PRO interface
• BSI JOHNSON CONTROL BSI04EV2-KEX programming (caratheristics data, complete read/write EEPROM, read/write flash, may be duplicated, code card, history) via OBD-PRO interface
• BSI SIEMENS BSI-E0X-00/BSI-F0X-00 programming (caratheristics data, complete read/write EEPROM, read/write flash, may be duplicated, code card, history) via OBD-PRO interface
• BSI SIEMENS BSI-S0X-00 programming (caratheristics data, complete read/write EEPROM, read/write flash, may be duplicated, code card, history) via OBD-PRO interface
• BSI CONTINENTAL BSI-Q0X-00 programming (caratheristics data, complete read/write EEPROM, read/write flash, may be duplicated, code card, history) via OBD-PRO interface

BSIs after 6/2015 and updated BSIs may not be supported.

V 2.23 Fiat ME17.3.x

Details

Published: 20 September 2017

Available for module "Engine ECUs":

• Alfa Romeo ME17.3.x programming (characteristic datas, EDC17 online checksum recalculation, read/write EEPROM + flash) via EDC17Prog interface
• Fiat ME17.3.x programming (characteristic datas, EDC17 online checksum recalculation, read/write EEPROM + flash) via EDC17Prog interface
  
• Lancia ME17.3.x programming (characteristic datas, EDC17 online checksum recalculation, read/write EEPROM + flash) via EDC17Prog interface
  

Available for module "Multifunctions":

• BCM Porsche (Centralina porte) 1L15Y programming (read/write data flash, read/write program flash) via XEP100Prog interface
  

V 2.22 FCA EDC17C69

Details

Published: 13 September 2017

Available in module "Engine ECUs":

• Alfa Romeo EDC17C69 programming (caratheristics datas, EDC17 online checksum recalculation, read/write EEPROM) via EDC17Prog interface
• Fiat EDC17C69 programming (caratheristics datas, EDC17 online checksum recalculation, read/write EEPROM) via EDC17Prog interface
• Jeep EDC17C69 programming (caratheristics datas, EDC17 online checksum recalculation, read/write EEPROM) via EDC17Prog interface

V 2.21 BMW dashboards 35160 D0WT emulator

Details

Published: 09 August 2017

Available in module "programmer":

• BMW dashboards from August 2015 are equipped with 35160D0WT EEPROM which is not erasable and has page-id which locks this memory to its own dashboard-micro. If you need to repair such dashboard you CANNOT erase or substitute original memory with recovered/bought one. You have to emulate original memory with our emulator.
• EEPROM 35XXX 35160 EMULATOR programming (guided procedure to clone original 35160 D0WT EEPROM and copy in emulator, erase, modify, write, content and ID Page) via XEP100Prog interface
  

Available in module "Dashboards":

• BMW 3 SERIES F30 35160 programming (characteristic datas modify, read/write EEPROM) via XEP100Prog interface
  

v 2.20 FCA MJD9 OBD

Details

Published: 17 July 2017

Available in "ECUs" module:

• FCA MJD9DF programming (identification, caratheristic datas, read/write EEPROM, read/write internal flash) via OBDII interface
• FCA IAW59M (hw<100) programming (identification, caratheristic datas, read/write EEPROM, read/write internal flash) via OBDII interface
• FCA IAW59M/5AM (hw 101/306) programming (identification, caratheristic datas, read/write EEPROM, read/write internal flash) via OBDII interface
• FCA IAW59M/5AM (hw > 306) programming (identification, caratheristic datas, read/write EEPROM, read/write internal flash) via OBDII interface

V 2.19 Land Rover Jaguar dashboards OBD

Details

Published: 31 May 2017

Available in "Dashboards" module:

• Jaguar XF programming (characteristic datas, read/write EEPROM) with 93C86 EEPROM via OBDII
• Jaguar F-Type 2016 programming (characteristic datas, read/write EEPROM) with 93C86 EEPROM via OBDII
• Jaguar XJ 2016 programming (characteristic datas, read/write EEPROM) with 93C86 EEPROM via OBDII
• Jaguar XE programming (characteristic datas, read/write EEPROM) with 93C86 EEPROM via OBDII
• Jaguar F-Pace programming (characteristic datas, read/write EEPROM) with 93C86 EEPROM via OBDII
• Land Rover Evoque 2016 programming (characteristic datas, read/write EEPROM) with 93C86 EEPROM via OBDII
• Land Rover Range Rover 2016 programming (characteristic datas, read/write EEPROM) with 93C86 EEPROM via OBDII
• Land Rover Vogue 2016 programming (characteristic datas, read/write EEPROM) with 93C86 EEPROM via OBDII
• Land Rover Range Rover Sport 2016 programming (characteristic datas, read/write EEPROM) with 93C86 EEPROM via OBDII

Available in "Multifunction" module:

• Land Rover KVM 9S12XET256 (2M35J) programming (automatic re-activation keys programming) via XEP100Prog
• Land Rover KVM 9S12XEQ384 (1M12S) programming (read/write EEPROM, read/write Data Flash, read/write Program Flash, automatic re-activation keys programming) via XEP100Prog

V 2.18 Fiat - Ford - Land Rover dashboards OBD

Details

Published: 04 April 2017

Available in "Dashboards" module:

• Ford Ecosport 9S12XEQ384 programming (characteristic data, read/write EEPROM)
• Ford Transit 93C76 programming (characteristic data)
• Fiat Freemont 93C76 programming (characteristic data, ecu hours)
• Dodge Journey 93C76 programming (characteristic data, ecu hours)
• Range Rover 24C16 programming (characteristic data)
• Range Sport 24C16 programming (characteristic data)
• Range Rover Vogue 24C16 programming (characteristic data)
• Jaguar XJ 24C16 programming (characteristic data)

V 2.17 Universal Memories Adapter for XEP100Prog + MRPPad

Details

Published: 18 January 2017

Available the new "UNIVERSAL MEMORIES ADAPTER" hardware module. It's a module to be used with XEP100Prog + MRPPad to manage memories.

Some of its specifications:

• support for TSSOP8 (DW), TSSOP8 (DS), DIL, SO8 memories
• support for 35XXX set memories: protected area erase, complete erase, write
• support for 93XXX - 24XXX - 25XXX - 95XXX sets memories
• support for non-standard type memories (es. OKI 951G)
• "in-circuit" connection to the memory
• it's safe: even if memory is wrongly placed or badly connected, universal memories adapter recognizes the situation and stops
• current protected and voltage protected
• can supply up to 1 A of current on each of 8 pin (thanks to FPGA programmable logic)
• further future developments allow to support every memory format (thanks to FPGA programmable logic and replaceable hardware connectors module)
• to be used with XEP100Prog interface + MRPPad

V 2.16 Renault DCM 1.2 CAN line

Details

Published: 25 January 2017

Available in "multifunction" module:

• Audi EZS-KESSY A6/Q7/AllRoad 9S12DG256 programming (read/write EEPROM, read/write flash, decode keys, modify immo datas)
• Smart Fortwo 2011 -> BCU HCS12DX256 programming (modify characteristic datas, read/write EEPROM, read/write flash)

Available in "ECUs" module:

• Renault Delphi DCM 1.2 linea CAN programming (modify characteristic datas)
• Porsche Bosch Motronic ME7.8 EEPROM 95640 programming (modify characteristic datas, overrevs)

V 2.15 Ford Dashboards

Details

Published: 09 January 2017

Available:

• Ford B-MAX - programming (characteristic datas, read/write EEPROM, read/write immobilizer datas) - via OBD interface
• Ford CONNECT - programming (characteristic datas, read/write EEPROM, read/write immobilizer datas) - via OBD interface
• Ford CONNECT (HCS12H256/HCS12HZ256) - programming (characteristic datas, read/write EEPROM, read/write immobilizer datas) - via OBD interface
• Ford FIESTA (HCS12H256/HCS12HZ256/HCS12XEQ384) - programming (characteristic datas, read/write EEPROM, read/write immobilizer datas) - via OBD interface
• Ford FOCUS (HCS12H256/HCS12XHZ512/95320) - programming (characteristic datas, read/write EEPROM, read/write immobilizer datas) - via OBD interface
• Ford FOCUS C-MAX(HCS12H256/HCS12XHZ512/95320) - programming (characteristic datas, read/write EEPROM, read/write immobilizer datas) - via OBD interface
• Ford FUSION (HCS12H256/HCS12HZ256) - programming (characteristic datas, read/write EEPROM, read/write immobilizer datas) - via OBD interface
• Ford GALAXY (24C16/24C32/HCS12XHZ512) - programming (characteristic datas, read/write EEPROM, read/write immobilizer datas) - via OBD interface
• Ford KUGA (HCS12XHZ512) - programming (characteristic datas, read/write EEPROM, read/write immobilizer datas) - via OBD interface
• Ford MONDEO (24C16/24C32/HCS12XHZ512) - programming (characteristic datas, read/write EEPROM, read/write immobilizer datas) - via OBD interface
• Ford S-MAX (24C16/24C32/HCS12XHZ512) - programming (characteristic datas, read/write EEPROM, read/write immobilizer datas) - via OBD interface
• Ford TRANSIT(HCS12H256/95320) - programming (characteristic datas, read/write EEPROM, read/write immobilizer datas) - via OBD interface

For "ECUs" module:

• Ford EDC17C10 additional programming (key parameters: chassis, IMMO sync)

V 2.14 Opel Meriva B BCU

Details

Published: 01 December 2016

Available:

• Opel Meriva B BCU (characteristic datas reading, CARPASS reading) via OBD interface

V 2.13 Renault Opel dashboards

Details

Published: 09 November 2016

Available:

• Renault LAGUNA 08-> 24C16 (characteristic datas, dashboard test, bench dashboard power on, read/write EEPROM)
• Renault MEGANE 09-> 24C16 (characteristic datas, dashboard test, bench dashboard power on, read/write EEPROM)
• Renault KANGOO 07-> 93C76 (characteristic datas, read/write EEPROM)
• Renault KOLEOS 95160 (characteristic datas, read/write EEPROM)
• Renault FLUENCE 95160 (characteristic datas, read/write EEPROM)
• Renault MEGANE 03-04 93C56 (characteristic datas, dashboard test, bench dashboard power on, read/write EEPROM)
• Renault CLIO 05-07 24C04 (characteristic datas, dashboard test, bench dashboard power on, read/write EEPROM)
• Renault MEGANE 05-07 24C04 (characteristic datas, dashboard test, bench dashboard power on, read/write EEPROM)
• Renault MODUS 93CX6 (characteristic datas, dashboard test, bench dashboard power on)
• Renault PASSENGER-> 93C76 (characteristic datas, read/write EEPROM)
• Opel VIVARO 11-> 93C76 (characteristic datas, read/write EEPROM)
• Opel MOVANO 10-> 93C76 (characteristic datas, read/write EEPROM)

In "Multifunction" module:

• CAS BMW:CAS3X 9S12XET512 (2M25J) (characteristic datas, read/write EEPROM, read/write flash)

V 1.86 locked 912/9S12 XEP100Prog

Details

Published: 23 September 2015

Available support for locked 912/9S12 via MDP Evo XEP100Prog interface:

• read/write EEPROM
• read/write flash

V 2.12 Opel Chevrolet BCU Porsche BCM

Details

Published: 31 August 2016

Available:

• Opel Insignia BCU (characteristic datas) via OBDII interface
• Opel Astra J BCU (characteristic datas) via OBDII interface
• Opel Adam BCU (characteristic datas) via OBDII interface
• Opel Mokka BCU (characteristic datas) via OBDII interface
• Opel Corsa E BCU (characteristic datas) via OBDII interface
• Opel Zafira C BCU (characteristic datas) via OBDII interface
• Chevrolet Cruze BCU (characteristic datas) via OBDII interface
• Chevrolet Trax BCU (characteristic datas) via OBDII interface
• Chevrolet  Orlando BCU (characteristic datas) via OBDII interface
  • (supported versions 24C16/24C32/95160)

Porsche BCM (micro maskset1N35H - 2M25J) via XEP100Prog interface

V 2.11 Land Rover dashboards OBD Volkswagen EZS XEP100Prog

Details

Published: 20 July 2016

Available:

• Land Rover Discovery Sport dashboard 93C76 (characteristic datas) via OBDII interface
• Land Rover Evoque dashboard 93C76 (characteristic datas) via OBDII interface
• Land Rover Freelander 2 dashboard 93C76 (characteristic datas) via OBDII interface
• Volkswagen Crafter EZS MC9S12DT256 (characteristic datas, read/write EEPROM, read/write flash) via XEP100Prog interface

V 2.10 fixed bug

Details

Published: 13 July 2016

Fixed bug

V 2.09 FCA dashboards OBD

Details

Published: 06 July 2016

Available:

• FCA 500X (characteristic datas with service, dashboard test, DTCS erasing) via OBDII interface
• FCA 500 (TFT Display) (characteristic datas with service, dashboard test, DTCS erasing) via OBDII interface
• FCA Renegade 2015 (characteristic datas with service, dashboard test, DTCS erasing) via OBDII interface

V 2.08 fixed bug

Details

Published: 29 June 2016

Fixed bug

V 2.07 Volkswagen Seat Skoda Micronas CDC32X7 JTAG

Details

Published: 22 June 2016

Available:

• Volkswagen Micronas CDC32X7 (characteristic datas, read/write EEPROM, read/write flash, immo datas, dashboard test) - via XEP100Prog in JTAG
• Seat Micronas CDC32X7 (characteristic datas, read/write EEPROM, read/write flash, immo datas, dashboard test) - via XEP100Prog in JTAG
• Skoda Micronas CDC32X7 (characteristic datas, read/write EEPROM, read/write flash, immo datas, dashboard test) - via XEP100Prog in JTAG

V 2.06 Volkswagen Seat Skoda Micronas CDC32X7 boot mode

Details

Published: 08 June 2016

Available:

• Volkswagen Micronas CDC32X7 (characteristic datas, read/write EEPROM, read flash, immo datas, dashboard test) - via EDC17Prog in boot mode
• Seat Micronas CDC32X7 (characteristic datas, read/write EEPROM, read flash, immo datas, dashboard test) - via EDC17Prog in boot mode
• Skoda Micronas CDC32X7 (characteristic datas, read/write EEPROM, read flash, immo datas, dashboard test) - via EDC17Prog in boot mode

V 2.05 VAG MED17.1 boot mode Audi ME7.1.1 Fiat Body Computer OBD

Details

Published: 26 May 2016

Available:

• VAG Group MED 17.1 UDS (characteristic datas, read/write EEPROM) - via boot mode
• Audi ME 7.1.1 (characteristic datas) - via OBD interface
• Fiat Punto 188 Body Computer (characteristic datas, read/write EEPROM) - via OBD interface
• Fiat Doblò Body Computer (characteristic datas, read/write EEPROM) - via OBD interface

V 2.02 Ford EDC17 Mini MEV17

Details

Published: 21 April 2016

Available new entries for ECUs:

• Ford EDC17C10 (characteristic datas)
• Mini MEV17.4 (characteristic datas)

V 2.01 Renault Sirius Safir IAW SFR EMS

Details

Published: 07 April 2016

Available new entries for ECUs:

• Renault SFR200 (characteristic datas)
• Renault IAW6R.30 (characteristic datas)
• Renault SIRIUS 32/32N31/H - EMS3132 (characteristic datas, ECUs' memories)
• Renault SAFIR/SAFIR2 (characteristic datas)

V 2.00 Bosch ME7.7.0 ME7.9.3 OBD

Details

Published: 24 March 2016

Available new entries for:

• ECUs (Smart ME 7.7.0 K-line ECU memories, Honda ME 7.9.3 memorie ECU memories)

v 2.03 Opel ME7.6.x dashboard Mercedes SBC OBD

Details

Published: 24 March 2016

Available new entries for:

• ECUs - Opel ME7.6.H4, ME7.6.1, ME7.6.2, ME7.6.3 (ST) - ECU reset, immo sync
• multifunctions - SBC Class E W211, Class SL R230, Class CLS W219 - characteristic datas, read/write eeprom
• dashboards - Opel Agila A, Corsa C, Meriva, Tigra - characteristic datas, read/write eeprom

V 1.99

Details

Published: 14 March 2016

Available new entries for:

• ECUs
• dashboards (FCA, Ford, Nissan, Opel)
• multifunction (FCA, Opel)

V 1.98 Bosch PSA M-ME 7.4.4 ME 7.4.5

Details

Published: 03 March 2016

Available for Bosch PSA M7.4.4, ME7.4.4 and ME7.4.5 K-LINE with micros ST10F275 and SAK166 via OBD interface:

• read/write EEPROM
• read/write flash (of micro)
• read/write characteristic datas

V 1.96 Bosch ME7.6H4 ME7.6.x

Details

Published: 08 February 2016

Available for Bosch ME7.6H4 and ME7.6.x with micros ST10F275 and SAK166 via OBD interface:

• read/write EEPROM
• read/write flash (of micro)
• read/write characteristic datas

V 1.95 Bosch ME 7.9.10

Details

Published: 26 January 2016

Available for Bosch ME7.6.3 via interfaccia OBD:

• read/write EEPROM
• read/write flash (of micro ST10F275)
• read/write characteristic datas

V 1.94 Fiat Bosch ME7.6.3

Details

Published: 12 January 2016

Available for Fiat Bosch ME7.6.3 via interfaccia OBD:

• read/write EEPROM
• read/write flash
• read/write characteristic datas

V 1.93 BMW EWS4 Audi EZS Smart SAM Porsche BCM

Details

Published: 04 December 2015

Available for Audi EZS-Kessy (9S12D128) and BMW EWS4 (9S12D64) via MDP Evo XEP100Prog interface:

• read/write EEPROM
• read/write flash
• decode keys and immobilizer data

Available for Porsche BCM (9S12XEP100 - 5M48H) via MDP Evo XEP100Prog interface:

• read/write data flash
• read/write program flash

Available for Smart SAM (9S12D128) via MDP Evo XEP100Prog interface:

• read/write EEPROM
• read/write flash
• modify characteristic datas

V 1.92 fixed bug

Details

Published: 11 November 2015

Fixed bug

V 1.97 fixed bug

Details

Published: 11 November 2015

Fixed bug

V 1.91 fixed bug

Details

Published: 04 November 2015

Fixed bug

V 1.90 35080 35160 EEPROM via XEP100Prog

Details

Published: 28 October 2015

Available 35080 - 35160 programming via MDP Evo XEP100Prog interface:

V 1.89 EDC17C64 VAG Group

Details

Published: 21 October 2015

Available EDC17C64 for VAG Group via MDP Evo EDC17Prog interface:

V 1.88 Bosch ME external flash OBD

Details

Published: 14 October 2015

Available additional function external flash for Bosch ME3.1, ME7.3.1, ME7.3H4:

V 1.87 EDC17 VAG Group Opel

Details

Published: 08 October 2015

Available EDC17CP44 for VAG Group and EDC17C18 for Opel via MDP Evo EDC17Prog interface:

• characteristic datas modification
• EDC17 online checksum recalculation

V 1.84 IAW5SFx Fiat

Details

Published: 07 September 2015

Now available IAW5SF, IAW5SF3/8/9 for Fiat/Lancia and IAW5SF4 for Fiat Industrial via OBDII:

• characteristic datas modification
• ECU memories
• read/write flash
• read/write emulated EEPROM

V 1.85 Delphi DCM 3.4 and 3.5

Details

Published: 07 September 2015

Available Delphi DCM 3.4 and 3.5 for Citroen, Ford, Peugeot, Renault:

• checksum recalculation

V 1.83 EDC17 Fiat Opel

Details

Published: 02 September 2015

Now available EDC17C49 for Fiat Freemont, Alfa Romeo and EDC17C19 for Opel via interfaccia EDC17Prog and MRPPad:

• characteristic datas modification
• online EDC17 checksum recalculation

V 1.82 XEP100Prog in MRPPAd

Details

Published: 27 July 2015

Now available XEP100 programming as maskset 1N35H and 5M48H via XEP100Prog interface and MRPPad:

• read/write data flash
  
• read/write program flash
  

V 1.81 Mercedes EDC17C43

Details

Published: 21 July 2015

Now available EC17C43 for Mercedes Class A W169 and Class B W245:

• read/write EEPROM in boot mode via MDP Evo EDC17Prog interface
  
• checksum online recalculation
  

V 1.80 Bosch number description

Details

Published: 20 July 2015

Now available Bosch number description, you get:

• ECU's description
• compatible ECUs

V 1.79 EDC17 and MED17

Details

Published: 17 July 2015

Now available Insignia EDC17 and Giulietta MED17:

• read/write EEPROM in boot mode via MDP Evo EDC17Prog interface
  
• online checksum recalculation

V 1.78 EDC16 Renault in OBDII

Details

Published: 26 May 2015

Now available EDC16C3 for Renault:

• read/write characteristic parameters
  

plus, IAW4AF HW 204:

• read/write EEPROM 95160
• read/write Flash ST10F168

Dialprog features for MRPPad

Details

Published: 26 May 2015

Dialprog features are now available for MRPPad also

V 1.77 EDC17 ECUs Fiat group

Details

Published: 05 May 2015

Now available EDC17C49 - EDC17C79 - MED17.3.1 ECUs for Fiat group:

• read/write EEPROM in boot mode via MDP Evo EDC17Prog interface
  
• online checksum recalculation

plus, for EDC15C5 Euro 2 Fiat Group:

• read/write EEPROM

V 1.76 Nissan and Renault EDC16 via OBDII

Details

Published: 14 April 2015

Now available Renault Trafic EDC16C36 and Nissan Qashqai EDC16CP33:

• read/write characteristic parameters Renault Trafic EDC16C36 via OBDII
• read/write characteristic parameters Nissan Qashqai EDC16CP33 via OBDII

V 1.75 Mini MEV17 and IAW5NF

Details

Published: 27 March 2015

Now available:

• read/write EEPROM for Mini MEV17 in boot mode via EDC17Prog interface plus online checksum recalculation 
• read/write flash for IAW5NF Motorola 68F375

V 1.74 Renault key coding OBDII

Details

Published: 24 March 2015

Now available key coding for Renault Laguna 2 and Clio 2, 3 - Smart Card and UCH unit:

• read/write EEPROM 93C66 via OBDII

V 1.73 IAW5NF Fiat Group and Denso Opel

Details

Published: 12 March 2015

Now available IAW5N Fiat Group via OBDII:

• read/write EEPROM

plus, Open Denso 1.7CTDI < 2010 CAN e 1.7CTDI > 2010 CAN

• read/write characteristic parameters

V 1.72 EDC15 ECUs Fiat group

Details

Published: 18 February 2015

Now available EDC15C6 - EDC15C7 ECUs for Fiat group via OBDII: 

• read/write EEPROM
  
• read/write characteristic parameters
• read code badge

V 1.61 range 4AF/59F/5AF/5NF Fiat group

Details

Published: 02 February 2015

Now available for 4AF/59F/5AF/5NF of Fiat group:

• read/write EEPROM and flash

V 1.65 IAW9GF Fiat group via OBDII

Details

Published: 02 February 2015

Now available for IAW9GF of Fiat group via OBDII:

• read/write EEPROM and flash via OBDII

V 1.66 EDC17 Renault via OBDII

Details

Published: 02 February 2015

Now available EDC17 of Renault:

• read/write characteristic parameters via OBDII of EDC17C11, EDC17C42

V 1.67 EDC16 VAG group

Details

Published: 02 February 2015

Now available EDC16 for VAG group:

• read/write characteristic parameters of EDC16U1, EDC16U31, EDC16U34, EDC16CP31, EDC16CP34
• decode IMMO data

V 1.68 EDC15 VAG group

Details

Published: 02 February 2015

Now available EDC15 of gruppo VAG:

• read/write ERPROM
• IMMO data decode
• read/write characteristic parameters

V 1.69 Bosch EDC16 - Delphi DCM1.2 Renault group

Details

Published: 02 February 2015

Now available EDC16 and DCM 1.2 for Renault group:

• read/write characteristic parameters of Bosch EDC16CP33 UDS e Delphi DCM1.2 via OBDII

V 1.70 Bosch ME7 ECUs

Details

Published: 02 February 2015

Now available Bosch ME3.1, ME7.3.1, ME7.3H4 ECUs via OBDII:

• read/write EEPROM 95080
• read/write characteristic parameters

V 1.71 Opel group Denso ECUs

Details

Published: 02 February 2015

Now available Opel group Denso ECUs via OBDII:

• read/write EEPROM and flash via OBDII for ECUs with 93C86 in versions:
  • 1 93C66 memory and 64F7055 micro,
  • 3 93C86 memory and 64F7058 micro,
  • 4 93C86 memory and 64F7059 micro

V 1.56 added Porsche range

Details

Published: 02 February 2015

• Bosch ME5.2 - ME7.2 - ME7.8
• Siemens SDI3 - SDI4

V 1.57 Renault keys coding

Details

Published: 02 February 2015

It's now available key coding via OBDII for Smart Card Renault for

• Megane II
• Scenic II

V 1.58 Fiat group dashboard

Details

Published: 02 February 2015

• Read/write characteristic parameters
• Service executing adjustment
• Read/write EEPROM (not supported for all devices)

V 1.59 VAG group EDC17 PCR2.1

Details

Published: 02 February 2015

• Bosch EDC17CP04, EDC17CP14, EDC17CP20, EDC17C46
• Siemens PCR2.1

Opel -- MJD6.6JO - 6O2 - 6O3

Details

Published: 16 April 2014

Opel MJD6.6JO,  MJD6.6O2, MJD6.6O3 are now available

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Renault Group -- EDC16 CP33 CAN DPF - NO DPF

Details

Published: 16 April 2014

BSI PSA Group is now available

Renault Group -- EDC17 CP10-CP11-CP42 & Siemens SID 305

Details

Published: 16 April 2014

Renault EDC17 CP10-11-CP42 Siemens SID 305 is now available

Siemens tricore Checksum recalculation

Details

Published: 16 April 2014

Siemens tricore Checksum recalculation for EEPROM is now available

Bosch EDC17 - MED17 - MEV17 Checksum recalculation

Details

Published: 16 April 2014

Bosch EDC17 - MED17 - MEV17 Checksum recalculation for EEPROM is now available

PSA Group BSI

Details

Published: 16 April 2014

PSA Group BSI is now available