What's New?
Version 3.40.76
08/01/2023 15:47:50
Price
1000 €*
Price excluding VAT
BOOTBENCH program for reading the EDC16C39 FCA BOSCH ECUs without having to open them, with the simple addition of 2 more wires, with connection to the bench!
- Read/Write EEPROM ,
- FLASH reading. (the checksum writing and recalculation function will be added soon),
- Characteristic data as present in the version that operates on the file.
|
In the "Engine control units" module:
- EDC16C39 EURO4 DPF (Mot. 1.9-2.4) - Characteristic data, code and revergination, eeprom reading/writing, flash reading.
- EDC16C39 EURO5 DPF (Mot. 1.6-2.0) - Characteristic data, code and revergination, eeprom reading/writing, flash reading.
- EDC16C39 FIAT SEDICI EURO4 (Mot 2.0) - Characteristic data, code card and re-virgination, eeprom reading/writing, flash reading.
- EDC16C39 FIAT SEDICI EURO5 (Mot 2.0) - Characteristic data, code card and revirgination, eeprom reading/writing, flash reading.
- EDC16C39 EURO4 DPF (Mot 1.9-2.4) - Characteristic data, code and revergination, eeprom reading/writing, flash reading.
- EDC16C39 FIAT DUCATO - Characteristic data, code card and revirgination, eeprom reading/writing, flash reading.
- EDC16C39 EURO4 DPF (Mot. 1.9-2.4) - Characteristic data, code and revergination, eeprom reading/writing, flash reading.
- EDC16C39 EURO5 DPF (Mot. 1.6-2.0) - Characteristic data, code and revergination, eeprom reading/writing, flash reading.
- EDC16C39 EURO4 DPF (Mot. 1.9-2.4) - Characteristic data, code and revergination, eeprom reading/writing, flash reading.
- EDC16C39 EURO5 DPF (Mot. 1.6-2.0) - Characteristic data, code and revergination, eeprom reading/writing, flash reading.
- EDC16C39 IVECO DAILY - Characteristic data, code and revirgination, eeprom reading/writing, flash reading.
Dear customer, due to an error by the Edc17Prog PCB supplier, 2 resistors have been mounted which affect the functioning of the interface for the BootBench program.
For those who already have the EDC17 bootbench program, the modification is already done.
It is therefore necessary to open the interface and remove 2 resistors. A detailed guide of the operations to be carried out can be found by clicking on the following link
It is need to update the EDC17 Prog interface to version 1.55